BuildBlock Building Systems introduces its 4-in. product line which consists of straight, 90-degree and 45-degree insulating concrete forms. The longer corners in both 90 and 45 degrees are designed to make stacking and pouring easier.
For more info, please indicate #50 on e-Inquiry.

TF System offers its vertical insulated concrete forms to be used in the construction of exterior walls, either below or above grade. The stay-in-place forms are designed for energy efficiency, security and comfort.
For more info, please indicate #51 on e-Inquiry.

American PolySteel offers a comprehensive line of insulating concrete form products. The line includes the PS 4000 Flat Wall, PS 3000 Waffle Grid and PolyPro 4000 KD Flat wall forms.
For more info, please indicate #52 on e-Inquiry.

Quad-Lock Building Systems offers its R-32 insulated concrete form wall systems which combine a 2.25-in. regular panel used on the interior and 4.25-in. Plus Panel on the exterior. The uneven insulation configuration shifts the thermal center closer to the interior of the structure.
For more info, please indicate #53 on e-Inquiry.

Arxx Walls & Foundations insulated concrete forms consist of stay-in-place expanded polystyrene forms. The solid concrete core stabilizes the indoor temperature because of its thermal mass. The forms also make it easy to accept any finish including all types of siding, stucco, and brick or stone veneer.
For more info, please indicate #54 on e-Inquiry.

Owens Corning’s Fold-Form is designed to create a permanent insulation blanket around a monolithic concrete core to reduce heat transfer, and eliminate bridges and cold spots. It is tested to provide protection against flying debris from winds as high as 200 mph.
For more info, please indicate #55 on e-Inquiry.

Amvic Building Systems offers its insulated concrete forms. It features a fully reversible FormLock interlock. It’s manufactured using 2.5 in. of 1.5 lb.-per-cu.-ft. density EPS foam on each side of the form.
For more info, please indicate #56 on e-Inquiry.

The T-Form from Reward Wall Systems is designed for use with the company’s iForm to make construction of interior demising walls more efficient. It is 11 in. in overall width providing a 6-in. concrete core for both the intersecting and longitudinal walls.
For more info, please indicate #57 on e-Inquiry.

CertainTeed Corp. offers its ThermaEZE thermal insulation system. Its insulation panels, which consist of expanded polystyrene foam, are set within the wall forms prior to pouring and are held in place by a patented web structure. Drywall is attached directly to the product which provides a minimum R-value of 11.5.
For more info, please indicate #58 on e-Inquiry.

Tritex ICF Products introduces a ledge reinforcement system to its Xillix product line. The two-piece system consists of a 91/4-in. ledge ICF and a 91/4-in. preformed welded wire reinforcement.
For more info, please indicate #59 on e-Inquiry.